User Manual
NP Lite AV over IP solutions
Control Software for Video Wall Controller
Manual Statement
Thank you for using our video wall controllers, customer should read the user manual carefully for your convenience, and follow the steps on the manual, please contact us when you have problems during the operation.
The contents of this manual are possible to change due to product version upgrades or other reasons.
We reserve the right to modify the contents of this manual without notice or reminder.
We will update this manual as the improvement of product function and periodically change or update the content in this manual, with the updated content shown in the new version without further notice.
Preface
The control software mainly introduces the client’s software characteristics of video wall controller, configuration and basic operation of the user, please read this manual carefully before using the video wall controller.
Graphical Interface Format Conventions
Format
Significance
[ ]
[ ]Indicates the window name, menu name, datasheet, for example pop-up <New user> window.
[ ]
[ ]indicates the button name, for example click <Confirm> button.
A+
This icon indicates the necessary supplement and description of the instruction of the operation.
A+
Illustration: This software manual is the latest, and its usage mode is different with others, with the specific difference in debugging & usage mode detailed in other chapters of this manual.
1Preparation
1.1 Inspire hardware
1.Support 1080P resolution, one PC adjustment terminal of WIN10 is installed. 2.Several network cables, 1 Gigabit PoE small switch. 3. KVM demand: two male USB lines, two, keyboard mouse. 4. Audio addequin: 3.5mm turn 3PIN audio cable two, small speakers. 5. Peripheral control requirements: serial port, serial port 3pin, if you need infrared, you need an infrared receiving rod, an infrared emission stick.
1.2 Software
1）UMPLATFORM_4.9.8 or above
2）Designer software
3）Client software
4）Other auxiliary software
a)Stream media playing software：VLC media player b)Serial port adjustment software：NetAssist.exe、sscom5.13.1.exe c)Internet capture software：wireshark.exe
1.3Client
Step 1: Look for the program icon, the following is the Windows PC client icon.
Step 2: Login
IPad: Mall Download: Distributed System Control Platform, Icon and Login Methods, and Windows Systems.
1.4 Network design diagram
Understand the current network bank information, such as the above picture, IP planning and peripheral control requirements.
2. System configuration necessary condition
Detect the computer necessary and the node IP address to modify the node parameters, upload design, and client return and operation. Node factory IP is set to: 192.168. . , 255.255.0.0. You can set the computer 192.168.0.251, 255.255.0.0, cross-grid scan, and set the node one by one. If the parameters are still seamless, modified to 192.168.x.251.255.255.255.0, X and the node. Perform the same network segment scan setting. Under normal circumstances, it can be solved.
Firewall pollination related commissioning software and client
Switch Broadcast Support, the scale application IGMP V2 management must have.
3. System basic configuration
Step 1: Set the input and output name, IP, subnet mask, gateway according to the planning design setting
Step 2: Turn on one of the signals as a splicing wall (2), main mode (1). As shown below, click Settings without rebooting.
Step 3: Click Reflect (3) to automatically select other settings to open (4) The master slave mode is from (5). Click to set, as shown below. 5-8 minutes, you can click on the list "Main From Location" to view the synchronization.
4 Video input configuration
4.1HDMI signal source configuration
4.1.1HDMI 1080P and the following input configuration
Step 1: UMP default configuration, as shown above. The designer operation is made below.
Step 2: Click 1 New Signal Group, 2 Double-click the new group, you can modify the name, 3 Select the input source. If there is a new access input, you can scan the input. If history has a residual white IP, you can select one, click "-" to delete.
4.1.2HDMI 4K source input configuration
Step 1: Select 1 input, select 2 Advanced Settings - System, 3 Select 4K input, 4, select Enable 4K, 5 Click Settings, 6, click Restart to take effect. If the output is a 4K node, the input node does not need other adjustments. If you need to be compatible with the 1080P node output, then you need to set the following 4 and 5 must be set as follows.
Step 2: The input configuration operation of the designer does not change.
5 IPC input signal source configuration
5.1IPC and Distributed Networking Description
Networking Description: IPC's RTSP stream is directly connected to a distributed system directly through the network cable
5.2High-definition IPC
Step 1: IPC connection routing can be distributed LAN Step 2: Click Step 3: As shown below
Step 3: You can use the VLC to view the maincoming RTSP stream of the IPC camera first.
The above example is the green box is the main code stream, and the red is a auxiliary stream, different IPC different addresses, which requires input verification separately.
5.3IPC can be exposed to preview configuration in PC client
Step 1: Connect the IPC forwarding node, and the dial is up. Step 2: Press the steps step to make the connection. Step 3: The designer is uploaded to take effect.
6 Video output configuration
Note: The output node function is three options: splicing wall and KVM seat, IPC forwarding, not at the same time.
6.1Output a single display
Step 1: Select the corresponding page
Step 2: Select the corresponding wall
Step 3: Modify the size of the wall, you can also modify the wall size first
Step 4: Click to select the output node,
Step 5: Click on the wall position.
Step 6: View if the IP is the corresponding output node IP
Step 7: The default single screen 1080p configuration, 1920, 1080. If the 4K node is required and 4K output resolution is required, it is modified to 3840, 2160. If the LED splicing is set, it is configured according to the actual scale. Must be a multiple of 4.
6.2Output LCD splicing screen configuration
Set it as shown above. If the output exception and the number of splicing walls are insufficient, please contact technical experts.
6.3Output LED splicing screen configuration
Set it as shown above. If the output exception and the number of splicing walls are insufficient, please contact technical experts.
6.4 4K resolution output configuration of 4K node
The 4K node sets two parameters for the maximum decoded resolution and output resolution in the corresponding position corresponding node. After setting, restart it, the docking is 4K screen. Note: Advanced password is (the day + month + day) *
7 Audio input node setting
Strictly consistent with the three parameters of the following, the volume must be 1, and then restart. The input mode is available on demand.
8 Audio output node settings
As shown below: Audio output mode, select HDMI or 3.5mm, two choices. Volume: Set the maximum sound output, the output of the output occurs than the original sound.
9 Designer configuration switching operation
9.1Audio video synchronous switch configuration
Last updated
